BANDA ELECTRA 2K1
$345.00
The ELECTRA Line was specially developed for those who seek unparalleled bass. It features a frequency response of 5 to 500Hz (-3dB), making the ELECTRA perfect for driving only subwoofers and deep bass. The BASS BOOST @ 45Hz feature sets it apart, further enhancing the low-end performance of your system.
Built with a 100% aluminum chassis, it delivers 2000 Watts RMS with a single input channel, supporting 1 Ohm impedance. It offers extremely low harmonic distortion (less than 1%), a clipping indicator, forced ventilation, and short circuit protection. Additionally, it boasts a sleek and clean design that complements any sound system.
1 in stock
Technical Specifications
| Maximum Power 14.4v @ 1 Ohm | 2600 WRMS |
| Maximum Power 14.4v @ 2 Ohms | 2000 WRMS |
| Maximum Power 12.6v @ 1 Ohm | 2000 WRMS |
| Maximum Power 12.6v @ 2 Ohms | 14800 WRMS |
| Efficiency @ 2 Ohms | 77% |
| Efficiency @ 1 Ohm | 65% |
| Input Voltage | 9 – 15V |
| Input Impedance | 100K Ohms |
| THD+N | 0.10% |
| Input Sensitivity | 160mV – 4V |
| Signal to Noise Ratio | 70dB |
| Frequency Response (Switch OFF) | 5 a 500Hz (-3dBs) |
| Frequency Response | 20 a 500Hz (-3dBs) |
| Bass Boost @ 45Hz | Variable 0 to +18dBs |
| HPF (Subsônico) | 20 to 80Hz @ 12dB/octave Linkwitz-Riley |
| LPF (Crossover) | 80 to 500Hz @ 12dB/octave Linkwitz-Riley |
| Recommended Fuse | 100 A |
| Rest Current | 2A |
| Maximum Current (sine signal) | 220 A |
| Maximum Current (musical signal) | 110 A |
| Power Cables (recommended min.) | 21mm / 4 AWG |
| Output Cables (recommended min.) | 2 x 4mm / 2 x 11 AWG |
| Weight (kg) | 3.3 |
| Height (mm) | 54 |
| Width (mm) | 209 |
| Depth (mm) | 243 |
Additional information
| Weight | 4 lbs |
|---|
