Taramps TS 400X4
$ XXX.XX
Clean Sound. Compact Power. Taramps Performance.
The Taramps TS 400×4 is a compact 4-channel amplifier designed for clean and reliable sound in your car audio system. With 400 Watts RMS distributed over 4 channels—and the ability to bridge channels for more flexibility—it’s ideal for a wide range of setups.
Whether you’re running full-range speakers, 2-way kits, or drivers and tweeters, this amp delivers clarity, punch, and control.
It features RCA inputs, independent gain controls, and fixed crossovers (HPF, LPF, and Full) on each channel for precise tuning. Built for practicality and performance, the TS 400×4 brings Taramps quality in a sleek, all-white design to stand out in any build.
- 400W RMS (4×100W @ 2Ω)
- Bridgeable: Configure 2×200W @ 4Ω
- RCA inputs
- Built-in fixed crossover and gain per channel
- Compact and lightweight
Technical information
| 2 Ohms VERSION | Nominal Power @13.8VDC 2 Ohms: 400W RMS (4 x 100W RMS) 4 Ohms: 252W RMS (4 x 63W RMS)2 Bridged Channels 4 Ohms: 400W RMS (2 x 200W RMS) |
|---|---|
| Number of Channels | 04 |
| Input Sensitivity | 200mV |
| Signal to Noise Ratio | >90dB |
| Frequency Response | 18Hz ~ 30KHz (-3dB) |
| Crossover high pass (HPF) | 90Hz (-12dB/8ª) Fixed |
| Crossover low pass (LPF) | 90Hz (-12dB/8ª) Fixed |
| Input Impedance | 22K ohms |
| Output Impedance | 2 Ohms |
| protection system | Thermal and Output Short |
| Minimum Supply Voltage | 8VDC |
| Maximum Supply Voltage | 16VDC |
| Consumption at rest | 0.8A |
| Maximum music consumption | 16.5A |
| Maximum consumption in sinusoidal signal | 33A |
| Dimensions (WxHxD) | 5.433 x 1.929 x 4.763 inches (138 x 49 x 121 mm) |
| Weight | 1.322 lbs (0.60kg) |
| EAN | 7898556840682 |
Additional information
| Weight | 3 lbs |
|---|
